|
Robertshaw
Industrial Products
|
|
Enter Centeron™. Centeron Distribution Management System features wireless tank level monitoring through the use of various measurement technologies and advanced communications capabilities. This product family emerged from the industrial controls group at Robertshaw.
|
 |
| Model VC-210 |
|
|
Model VC-210:
- Full ported or low flow designs
- Direct and reverse-acting valve styles 1/2 in., 3/4 in. and 1 in.
- Molded reinforced diaphragms
- "Packless" bellows stem seal
- Two-way and three-way valves
- Stainless steel investment castings and trim
- Available with 1/4 in. internal trim
|
 |
| Model VC-210 B |
|
|
Model VC-210 B:
- Direct and reverse-acting valve styles 1/2 in., 3/4 in. and 1 in.
- “Packless” bellows stem seal
- Two-way and three-way valves
|
 |
| Models VC-230A and VC231A |
|
|
Models Vc-230A and VC231A:
- Molded buna-N diaphragms, nylon reinforced
- Steel diaphragm cases
- Multiple steel springs
- Sturdy cast iron lower frame
- Quick disconnect valve stem construction
- Valve position indicator
- Field reversible
|
 |
| Model 167 |
|
|
Model 167:
- The 167 Level-Tel is a self-contained sensing transmitter with anti-coating circuitry that prevets build-up on the sensing probe, thus minimizing error
|
 |
| Excalibur 7000 |
|
|
Excailbur 7000:
- The Excalibur 7000 offers both a smart RF capacitance microprocessor-based level transmitter and PID controller, providing the flexibility to meet all level application requirements
|
 |
| Model 352 |
|
|
Model 352:
- The 352 Conductivity Switch is an on/off control unit that is completely self-contained and activates when reaching the calibrated set point on the probe
|
 |
| Model 85026 |
|
|
Model 85026:
- Set points range from 0°F to 400°F
- Aluminum or stainless steel materials
- 6°F to 16°F reset differential
- +5°F repeatability
- 5,000 psig and 10,000 psig thermowell ratings
|
 |
| Model I-542 |
|
|
Model I-542:
- Ratings: U/L, Class I, Group D, hazardous locations
- Temperature range is 130°F to 345°F in 20°F spans
- Pressure range is 5 psig to 25 psig (35 kPa to 175 kPa)
|
 |
| Model 85380 |
|
|
Model 85380:
- Cast steel materials
- Diaphragm: 40 -sq. in. Buna-N reinforced with nylon
- Cage trim: stainless steel
- ANSI Flanges: 150# or 300# class rating
- O-ring: Buna-N
- Vent: 3/4 in. NPT
|
 |
| Model HA-361 |
|
|
Model HA-361:
- Reliable, Robertshaw self-actuated regulators
- Sized sensing bulb housing
- ASME “code”
- Steam strainer
- Inverted bucket type steam trap
- Action adjustment valve
- Adjustable mounting feet
- All required fittings supplied
|
 |
| Model RT-711 |
|
|
Model RT-711:
- Sizes 3/4 in. through 2 in.
- Approx. 70°F set point adjustment spans 90°F to 200°F
|
 |
| Model ZT-100 |
|
|
Model ZT-100:
- Single-seated diaphragm control valve
- Temperature sensing pilot with a manual relief feature
- Combination pressure regulator-strainer- relief valve
- Adjustable set point spans are in approximately 30°F increments between 100°F and 210°F
- Control valve sizes are 3/4 in. through 2 in.
|
 |
| Model 368 |
|
|
Model 368:
- Acceleration sensitive—measures total destructive shock
- 15 psig to 50 psig supply pressure
- Adjustable set point range 0G to 4.5G
- NEMA 4 weatherproof enclosure
- Local manual or remote pneumatic reset
- Suitable for hazardous areas
- 20 psi output alarm
|
 |
| Euro366 |
|
|
Euro366:
- Flame Proof (Explosion Proof) - EEx d II B/C T6 IP66 T85°c - CESI03ATEX
- Self Powered - No external power necessary
- Adjustable set point range 0G to 4.5G
- Local or electric remote reset
- Minimum Maintenance - No moving parts except when set-point is exceeded
- Optional space heater to prevent condensation
- AC or DC reset coil options
|
 |
| Euro366G |
|
|
Euro366G:
- Flame Proof (Explosion Proof) - EEx d II B/C TC IP66 T85°c CESI 03 ATEX
|
|
|
